Inductive slot sensor SJ3,5-H
- 3.5 mm slot width
NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of SJ3,5-H
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Slot width | 3.5 mm | |
| Depth of immersion (lateral) | 5 ... 7 mm , typ. 6 mm | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Operating voltage | 5 ... 25 V | |
| Switching frequency | 0 ... 3000 Hz | |
| Hysteresis | 0.8 ... 1.1 mm | |
| Current consumption | ||
| Measuring plate not detected | ≥ 3 mA at nominal voltage | |
| Measuring plate detected | ≤ 1 mA at nominal voltage | |
| Functional safety related parameters | ||
| MTTFd | 8760 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 |
|
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Gb | IECEx PTB 11.0091X | |
| Equipment protection level Da | IECEx PTB 11.0091X | |
| Equipment protection level Mb | IECEx PTB 11.0091X | |
| ATEX approval | ||
| Equipment protection level Gb | PTB 99 ATEX 2219 X | |
| Equipment protection level Da | PTB 99 ATEX 2219 X | |
| UL approval | cULus Listed, General Purpose | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | flexible leads | |
| Housing material | PBT | |
| Degree of protection | IP67 | |
| Cable | ||
| Cable diameter | 1.1 mm ± 0.1 mm | |
| Bending radius | > 10 x cable diameter | |
| Material | PVC | |
| Core cross section | 0.14 mm2 | |
| Length | 500 mm | |
| Dimensions | ||
| Height | 15 mm | |
| Width | 10 mm | |
| Length | 19.5 mm | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: SJ3,5-H
Datasheet: SJ3,5-H
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet SJ3,5-H | 843 KB | |
| Datasheet SJ3,5-H | 840 KB | |
| Fiche de données SJ3,5-H | 839 KB | |
| Datenblatt SJ3,5-H | 841 KB | |
| Scheda tecnica SJ3,5-H | 839 KB | |
| Datasheet SJ3,5-H | 844 KB | |
| Folha de dados SJ3,5-H | 840 KB | |
| Hoja de datos SJ3,5-H | 840 KB | |
| Datasheet SJ3,5-H | 853 KB |
Documents: SJ3,5-H
| Instruction manuals | File Type | File Size |
|---|---|---|
| Инструкции | 183 KB | |
| Návod k poużití | 176 KB | |
| Instruktions manual | 175 KB | |
| Instruction manual | 176 KB | |
| Kasutusjuhend | 170 KB | |
| Käyttöohje | 169 KB | |
| Manuel d'instructions | 178 KB | |
| Betriebsanleitung | 177 KB | |
| Οδηγίες χρήσης | 186 KB | |
| Handleiding | 176 KB | |
| Instruction manual / Betriebsanleitung | 174 KB | |
| Használati útmutató | 179 KB | |
| Manuale di istruzioni | 176 KB | |
| Lietošanas pamācība | 175 KB | |
| Instrukciju vadovas | 176 KB | |
| Instrukcja obsługi | 177 KB | |
| Manual de instruções | 178 KB | |
| Manual de utilizare | 178 KB | |
| Návod na poużitie | 177 KB | |
| Navodila za uporabo | 174 KB | |
| Manual de instrucciones | 178 KB | |
| Manual | 174 KB |
CAD+CAE: SJ3,5-H
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 65 KB |
| CAD Portal / CAD Portal | LINK | --- |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 69 KB |
Approvals+Certificates: SJ3,5-H
| Certificates | File Type | File Size |
|---|---|---|
| Canada USA UL Ordinary Location | 1806 KB | |
| EU PTB ATEX ia 2G, 1G, 1D s. certificate | 7738 KB | |
| Worldwide PTB IECEx ia | LINK | --- |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 1332 KB | |
| UK Declaration of Conformity (P+F) | 1326 KB |
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
Pepperl+Fuchs (Pty) Ltd
8 Glen Eagle Office Park
Koorsboom Ave, Glen Marais, Kempton Park
1619 Johannesburg
South Africa
info@za.pepperl-fuchs.com
+27 87985 0797
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.