Optical data coupler LS230-DA
- 3 interfaces in a device can be selected via DIP switches
- RS 232
- RS 422
- CL - High detection ranges achievable
- Easy adjustment by integrated alignment LED and finder scope
- Band display for signal strength
- Sturdy aluminum housing
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of LS230-DA
| Product Description |
|---|
| Optical data coupler, 230 m detection range, infrared light, RS232/RS422 interface, data rate of up to 19.2 bit/s, terminal compartment |
| General specifications | ||
|---|---|---|
| Effective detection range | 0 ... 230 m | |
| Threshold detection range | 340 m | |
| Light source | IRED | |
| Light type | modulated infrared light | |
| Alignment aid | Telescopic sight, frontal red LED flashing, off with Signal > sufficient stability control |
|
| Transmission mode | FSK | |
| Response delay | 40 µs | |
| Diameter of the light spot | 8000 mm at a distance of 230 m | |
| Opening angle | emitter 2 ° , receiver 5 ° | |
| Ambient light limit | 3000 Lux | |
| Indicators/operating means | ||
| Data flow indicator | LED green: emitter LED yellow: receiver |
|
| Function indicator | LED band display 3-colour, LED red: single switching point LEDs yellow, 4-stage: sufficient switching point LED green: 3-fold switching point |
|
| Control elements | 8-fold DIP-switch for selection of transmission frequency and interface in the terminal compartment | |
| Electrical specifications | ||
| Operating voltage | 24 V DC ± 25 % | |
| No-load supply current | 250 mA | |
| Data sampling blanking | emitter deactivation for +UB, emitter deactivation TTL-compatible, receiver deactivation TTL-compatible | |
| Data rate | 0 ... 19.2 kBit/s | |
| Operation frequency | F1 = 83 kHz , F2 = 118 kHz | |
| Interface | ||
| Interface type | RS 232, RS 422, CL20 mA active/passive switchable | |
| Output | ||
| Stability alarm output | 2 PNP-outputs, short-circuit protected, 30 V DC 0.1 A activated for single or sufficient stability control |
|
| Measurement output | 2.5 ... 6 V DC, max. 10 mA , single stability control 3.5 V , sufficient stability control 5 V |
|
| Standard conformity | ||
| Standards | EN 60947-5-2 | |
| Approvals and certificates | ||
| Approvals | CE | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -20 ... 75 °C (-4 ... 167 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4 x M16 cable glands , spring terminals in the terminal compartment | |
| Material | ||
| Housing | Aluminum | |
| Optical face | plastic lenses, glass windows | |
| Mass | 1600 g | |
| Dimensions | ||
| Height | 116 mm | |
| Width | 162 mm | |
| Length | 133 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 43201404 |
Details: LS230-DA
Discover the LS682 various features, especially its easy alignment and commissioning …
Pepperl+Fuchs (Pty) Ltd
8 Glen Eagle Office Park
Koorsboom Ave, Glen Marais, Kempton Park
1619 Johannesburg
South Africa
info@za.pepperl-fuchs.com
+27 87985 0797
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.